CHOPPING

• Place the blade (E) onto the axis of the bowl (F) and place the ingredients to be chopped in the bowl.
• Fit the lid (D) on to the bowl (F) by pressing it until it locks into place.
• Place the motor unit (B) on to the bowl/lid set by turning gently to push the blade axis into the motor unit axis.
• Plug in the appliance.
• Press the control switch (A) and keep it pressed in, the Chopper will start to work.
• Release the switch (A) and wait for the blade to stop.
• Remove the motor unit (B) by pressing the lid (D) and unlocking the lid (D) by pushing in the opposite direction to when it was assembled. Remove the blade (E) carefully.

BLENDING

• Place the blade in the bowl as shown for chopping.
• Pour the liquid to be blended into the bowl.

IMPORTANT SAFEGUARDS

• Always keep the appliance out of the reach of children.
• Check that the voltage on the appliances rating label corresponds to the voltage on your mains supply source i.e. 230V, 50Hzs.
• Always unplug the appliance after use and before washing.
• Wait until the blade has completely stopped before removing the lid.
• Handle the blade (E) with care. It is extremely sharp.
• After much use, the blade will become blunt and should be changed.
• Do not pull on the motor unit (B) in water nor place it under running water.
• Never try to dismantle the appliance yourself.
• If the mains lead or the plug are damaged, do not use your appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

CLEANING

• Always unplug the appliance.
• The motor unit (B) must only be wiped with a damp cloth. Never place it in a dishwasher, immerse it in water or place it under running water .
• The bowl (F), the blade (E), the lid (D) can be washed under running water or in the dishwasher.

STORAGE

• After use the Chopper can be stored by wrapping the mains lead around the motor unit.